The Glock is one of the most well-regarded pistols on the market, and for good reason. The company has built a reputation for building pistols that are easy to operate and simple to maintain, making it one of the best choices for simple self-defense. Modern Glocks have been known to have a life expectancy of over 200,000 round. But like any tool, a Glock requires proper maintenance and upkeep to ensure it will last. Follow these simple directions to make sure your Glock lasts a lifetime.

When to Clean Your Glock

Glock pistols are designed to be easy to use, and unlike many other guns on the market, cleaning a Glock too much can have a negative effect on its durability. Avoid disassembling and cleaning your gun after every visit to the range. A good rule of thumb is to clean your pistol after every 300 rounds fired or once every three months. It can be beneficial to create a maintenance record for your Glock in the same way you record oil changes and routine maintenance on your car.

Materials Needed

Make sure you have all of the following materials together and easily accessible before beginning disassembly of your gun. You’ll need a few cleaning patches, q-tips, a cleaning rod, a brass bore brush designed for your gun’s caliber, a slotted tip for attaching the patches to the rod, a gun cleaning toolbrush, solvent, lubricant, and a rag.

Standard Cleaning Procedure

1. Ensuring Your Pistol is Safe to Clean

You should always treat your pistol with care, and you should always make sure your Glock is safe to handle before disassembly. Begin by pointing the pistol away from you and removing the magazine. After removal, be sure to eject any rounds from the chamber by racking the slide. Always visually inspect your pistol afterwards to make sure all rounds are cleared from the chamber.

2. Disassembling Your Pistol

Once you’re certain the chamber is cleared, point the gun in a safe direction (away from people and objects of value), and press the trigger. You should hear the firing pin move forward. This will position the slide to be safely removed.

It’s now time to disassemble your Glock into its individual components so that they can each be cleaned. Your pistol will break down into four basic parts: the barrel, slide, spring assembly, and frame. Pull down on the slide lock and move the slide forward to detach it from the body. You can then easily remove the slide position. Slide the barrel up and back to remove it from the frame. Your gun is now properly field stripped and ready for cleaning.

3. Cleaning the Barrel

Soak a cleaning patch in solvent, and thread it to the rod with your slotted tip. Then use the rod to carefully slide the cleaning patch down the breech end of the barrel. Carefully slide the patch down the full length of the barrel using a methodical clockwise motion. Do this four or five times to ensure the barrel’s interior is thoroughly cleaned of any debris. Then insert the brass bore brush and use a similar procedure to brush the inside of the barrel. Then wet the toothbrush with solvent and scrape off the barrel hood and feed ramp. You’ll want to follow up this cleaning by making sure the entire barrel is dried. Attach a dry patch to your rod and follow the same method to thoroughly clean out the interior, bore-end first. Then wipe down the exterior of the barrel with a dry patch.

4. Cleaning the Slide

Point the slide muzzle down, and carefully clean the breech face and extractor with your toothbrush. Take a dry q-tip and carefully comb over the inside of the slide. Dirt has a tendency to accumulate in this area, and it may take more than one q-tip to properly clean it. Then, take a solvent-dipped patch and clean the rest of the slide. Make sure to thoroughly dry the slide using similar methods to how you dried the barrel.

5. Cleaning the Spring Assembly

Use the brush to remove carbon deposits off of the spring assembly. If the assembly is especially dirty, you may apply solvent to the brush. Dry the assembly thoroughly afterwards. Then use the toothbrush to remove any debris from the assembly’s interior.

6. Inspecting and Oiling the Components

Before putting the Glock back together, give the individual parts one last inspection. Assess the cleaned components for any remaining dirt, cracks, or imperfections.

It’s time to lubricate the gun. Hold the slide with the muzzle end pointed slightly downward. Use an applicator to groom a single drop down either side slide rail. Then apply a third droplet to the inside of the slide, facing the upper portion of the barrel. Take the barrel, and apply one droplet to the rear side of the barrel lug and a second to the outside front of the barrel. Apply one last droplet to the frame, where the trigger bar connects.

7. Reassembling the Pistol

You can now put your Glock back together. Merely follow the disassembly steps in reverse. Carefully inspect the components as you slip them back in place tot ensure they operate as they should. Once everything is back together, the gun is ready to go back into your holster and out in the field again.

Here is a video that shows you these steps so that you can see what it actually looks like:

Since the 1940s, the Remington 700 has been an extremely popular rifle. Over time, it has become one of the top bolt-action rifles in existence. It’s frequently used by military personnel, but it’s also a popular choice among members of law enforcement.

The incredible level of accuracy is what makes the Remington 700 such a popular firearm. It’s commonly used by hunters but can work well for any situations that require tactical precision. Although the Remington 700 delivers incredible accuracy, a shooting platform is required to get the most out of it.

To get the best results, you’ll want to consider the best bipods for the Remington 700. Since there are several different models to choose from, it’s important to check for the right features.

What to Look For

Before you purchase a bipod for your Remington 700, it’s a good idea to consider how easy the product is to use. The best bipods should make it easy to mount the rifle, but they should make the rifle just as easy to dismount. You shouldn’t have to spend too much time attaching or detaching your rifle.

Another consideration is height adjustment. For the best results, you should be able to adjust the height of your bipod. Depending on the shooting situation, you might need to adjust your height for better accuracy. If the bipod’s height can be adjusted, you’ll be able to increase your shooting accuracy while sitting down. Another feature to check for is a sling swivel stud.

This component will allow you to effectively attach your bipod to the gun. Unfortunately, most bipods for the Remington 700 don’t come with this feature. The price is always an important factor to consider. Contrary to popular belief, you don’t always get what you pay for.

There are several bipods that provide huge value but don’t cost too much money. You’ll also want to check the flexibility and durability of the bipod. The strongest models are made of heavy metals, which help to keep large rifles stabilized.

Products that are made from heavy metals also last longer than cheaper alternatives. Some of the best bipods that you can buy are very flexible. A decent level of flexibility is important because it will allow you to take precise shots.

UTG Tactical OP Bipod Rubber Feet Center Height 8.3″-12.7″

If you’re looking for one of the best bipods that you can buy for a Remington 700 rifle, this is a top product to consider. UTG is a well-known brand and produces high-quality rifle accessories. Products from this company are known for affordability.

The UTG tactical OP bipod features a unique design, and it lets you mount your rifle to a sling swivel stud or Picatinny rail. Since most Remington 700 rifles have a front swivel stud feature, you should have no trouble attaching your rifle to this bipod.

Although it’s made from aluminum, this bipod is designed to last. The aluminum that this product is made of isn’t the cheap type of aluminum that many other products are made out of. The lightweight aluminum makes this bipod easy to carry, so you can save your energy for what really matters.

It can be used to secure your firearm and makes using it very comfortable. Heavier bipods can cause a lot of arm fatigue and cause your shooting accuracy to take a hit. With a useful panning feature, this bipod offers excellent flexibility. It makes it easy to align your rifle scope’s crosshairs.

This bipod is an especially great choice for hunters because it lets you easily track your targets. It will allow you to power through disruptive left and right movements. The UTG tactical OP bipod offers many of the features that you’d expect from a high-quality product, and although it does come with its share of downsides, it can help you get the most out of your Remington 700.

NcStar Precision Grade Bipod Full-size 3 Adapters (ABPGF)

The NcStar precision-grade bipod is another great product to consider purchasing. Since it’s a tactical bipod, it offers many features that you wouldn’t get from regular models. With a variety of useful features, it’s one of the best bipods that you can buy for your rifle.

It’s made of aircraft aluminum, which is a strong, lightweight material. However, without reinforcement, the aluminum isn’t nearly as strong as it could be, so the aluminum used to make this bipod has been reinforced with steel. One of the features that make this bipod a top choice is the height adjustability.

The height is fully adjustable, so you can adjust the NcStar bipod into several different positions. The entire accessory weighs less than a pound, so it’s an excellent choice for long adventures. If you frequently embark on long-distance hunting trips, this is a great bipod to consider.

Many hunters must travel long distances to find the perfect hunting spot, and a heavyweight bipod can sap the strength needed to maintain precise shooting. This bipod has foldable legs, which makes it even easier to carry. Although it’s not made from the strongest material, it’s one of the toughest products available.

It can withstand plenty of abuse and won’t damage easily. It will serve as a sturdy platform for your Remington 700 and can be adjusted for several different heights. It even has rubberized feet, which enhance the overall stability of the product.

When compared with other top bipods, this product is one of the easiest to transport. The foldable design is very convenient while traveling. Overall, it’s very affordable and delivers several great features for the money.

TipTop EZ Sniper Rifle Bipod 13.5″ – 23″

If you’re looking for a heavy-duty bipod that you can use with your Remington 700, this is a top choice. Most bipods are capable of adjusting to a height between six to nine inches. The problem is that many shooting situations require a taller height.

If you’ve ever used your rifle and wished that you had a few more inches of height, you need to consider getting this bipod. A large number of bipods must be used from a prone position. The benefit of a taller bipod is that you’re able to use it from a sitting position, which can dramatically increase comfort.

When you’re very comfortable, your shooting accuracy increases, and you should be able to take better shots. This sturdy bipod can be extended to a height of just over 23 inches. It serves as a tall, sturdy shooting platform for your Remington 700. When you’re not using it, you can fold this bipod and store it away. It features one of the easiest stud-mount designs on the market and has a black anodized finish.

It’s designed to be used in any weather conditions, so it’s an ideal product for hunters. If you want one of the best bipods on the market, the TipTop EZ sniper rifle bipod is an excellent choice. It’s made of aircraft-grade metal material, and it even has a patent pending for the sling stud feature.

UTG Synthetic Clamp-on Bi-pod

When searching for the best bipods that can be used with a Remington 700, many consumers want something simple. In fact, many situations call for a very simple product. You might not always have spare time to get a complex bipod set up.

In these situations, the UTG synthetic clamp-on bipod is an excellent choice. It’s made of strong zytel material, and it’s also extremely lightweight. The weight of the whole device is only six ounces, so it requires minimal energy to carry it long distances.

It shouldn’t take more than a few seconds to clamp it around a barrel, and it will fit most Remington 700 rifles. Since it’s very small, it can be folded and placed inside of a small bag. It offers great stability and has the potential to increase your shooting accuracy.

With such a low price, it’s one of the most economical solutions available for consumers who want a reliable bipod. Whenever you need to use this bipod, you can pull it out of your pocket and clamp it onto your rifle. The mounting process takes seconds, so you’ll always be ready to take an accurate shot.

Harris Engineering S-BRM Hinged Base 6 – 9-Inch Bipod

Harris is one of the most well-known brands for rifle bipods. The company is known for creating some of the best products on the market. The Harris Engineering S-BRM is lightweight and compact. The height can be adjusted, and you can attach your rifle to this accessory to gain better accuracy.

It allows you to convert your rifle into a bench weapon. There is nothing about this bipod that doesn’t feel extremely solid. In terms of overall stability, it’s unlikely that you’ll find a better product. All of the Harris bipods are built to be very sturdy.

This particular model is known for its no-slip legs, which have rubber pads. When firing heavy rounds with your rifle, you’ll notice that this bipod rarely moves. It can be fully extended and offers a max height of nine inches.

It can be attached to a swivel stud, so it’s an excellent choice for the Remington 700. The swivel action greatly improves flexibility, and the legs on this product are very easy to deploy. Overall, it’s one of the best bipods for a Remington 700 rifle.

Every handgun owner needs a quality holster, but the selection can be a complicated process even for the experienced shooter. The last thing you want is to not have your handgun accessible when you really need it. When shopping for a new holster, some of the most important things you need to look for are gun protection, accessibility and ease of use. Luckily for you, there is a wide range of options and styles on the market that will be sure to suit your needs.

The first thing you need to decide is what position you want to carry your handgun in. The most popular positions are inside the waistband, appendix inside the waistband or outside the waistband. You can also carry on your ankle or with a shoulder holster but depending on your attire, these may not always be the best option.

Outside the waistband holsters are typically reserved for larger framed pistols like the 1911. This is the most common carry method for police officers who need quick access to their handgun. A gun in this sort of holster is harder to conceal because you’ll need a cover garment such as a jacket. Most outside the waistband holsters are affixed to your belt utilizing a quick attach paddle or affixed belt loops. For right handed shooters the best place to mount your holsters is in the 3 o’clock position, or 9 o’clock for left handed shooters.

Most concealed carry individuals prefer inside the waistband carry. Once you master your draw using an outside the waistband holster, it is easy to transition to inside the waistband. Many holsters allow you to tuck a dress shirt into your pants, presenting a neat and clean appearance while also concealing your pistol. Belt mounting choices for inside the waistband pistols can get very complicated as there are tons of options ranging from j-hooks to spring clips and belt loops that are both soft and hard. Inside the waistband holsters are typically constructed from leather, kydex (which is also a plastic) or a combination of the two which is known as hybrid holsters. Placement along the belt line for right handed shooters should range between 3 and 5 o’clock or 7 and 9 o’clock for left handed shooters.

Appendix inside the waistband holsters have gained popularity in recent years but should only be used by advanced shooters. That’s because it places the gun in line with arteries in lower extremities. This carry position lets you hide, not only conceal, a 1911 much better than you would otherwise be able to at the 3 to 5 o’clock position. As a right handed shooter try to carry your pistol at approximately 11 o’clock, in the channel between your right leg and groin area. This is where you want the barrel of the pistol to ride. Typically the longer the pistol barrel, the better it stabilizes, especially when you’re performing rigorous activities. Because our mid sections are wider and flatter than our sides, this is a good place to carry a larger framed pistol such as the 1911. Since our arms hang at 10 and 2 o’clock, you have full control over the pistol with both hands and your arms will aid in natural concealment. This all leads to lightning fast draws as your hands require less movement.

Another important thing you will need to take into account is the retention system of the holster. Some holsters have straps that hold the handgun in place. Others have a button release or even use sheer friction and tension to hold the handgun in place. One thing to note is that if you’re at all concerned with the finish of your 1911, a quality leather holster will not scratch the slide of your pistol. Your handgun will be more prone to scratching if you use a holster that is composed of kydex. On the same token, a kydex holster will yield faster draws and re-holstering. These are definitely things you need to consider while shopping for a new holster.

Let’s take a look at some of the more popular holsters on the market today.

Galco KingTuk

The Galco KingTuk offers broad, padded leather that extends the length of your 1911’s slide with Kydex molding that grips your gun securely. This prevents slips and makes for a fast draw with easy holstering. A nice feature of this holster is what they call a combat cut, which allows you to get a proper grip while the gun is still completely holstered. Two adjustable metal belt clips allow you to angle angle the holster to the perfect position. The length and overall size of the KingTuk enables the holster to fully distribute your 1911’s weight. The last thing you want with a holster is one where the entire weight of your gun is pulling down on one specific spot and making a burden to carry. After some time, the holster should contour perfectly to your body making it one of the more comfortable inside the waistband holsters.

Fierce Defender IWB Hybrid Holster

This hybrid tuckable holster is constructed out of a single piece of leather which means no stitching to come loose. The front and back edges are completely finished which is a nice touch in regards to aesthetics and comfort. This holster features an adjustable cant so you can adjust the angle of carry that best fits your preference as well as an adjustable ride height (this plays an important role in the weight distribution of your 1911). It also has high carbon spring clips that resist twisting, warping or breaking over time due to fatigue like plastic clips sometimes do. This holster is great for concealment because it allows you to tuck it in between your shirt and pants for the least amount of printing possible. Lastly the kydex offers you that smooth and quick draw that you need from a holster. The combination of both leather and kydex in this holster is what makes it a “hybrid”.

Galco Jackass Rig Shoulder System

Galco also offers their Jackass Rig Shoulder System. This is a classic, tried and true holster system that has been around for years. This rig will accommodate most 1911 model handguns with a secure and confident fit. With comfort in mind, the horizontal holster features swivel connectors that attach to the harness for you to be able to adjust it in a more diagonal position. This holster is made from premium Center Cut Steerhide which has been proven to be durable and dependable. The Galco Jackass Rig Shoulder System is the perfect companion for long drives as you have nothing digging at your waistband while you’re seated. Additionally, vehicle entry and exit as well as seat belt fastening is not an issue with this style of holster. Galco’s Jackass Rig is perfect for colder weather as you can easily conceal the holster with a jacket or blazer. Like most shoulder holsters, this one comes with an ammo carrier that is very secure and sturdy. This comes as an advantage to other holster styles that will not accommodate extra ammunition and magazines. What is great about this holster system is that it is completely modular. You may purchase separate accessories and components for it to really make it your own.

Blackhawk CQC Serpa

Blackhawk’s CQC Serpa is a slick 1911 holster with great value. Right away you’ll notice its unique retention system. Instead of relying on a button-release or strap, the Serpa keeps your pistol in place with a quick-release latch. You can easily pull this latch free while doing a natural drawing motion. This means you can draw and secure with one hand. The retention lock holds the gun firmly in place on the Serpa, with no jostling, bouncing or give. Also, the snap-on clip is sturdy and doesn’t wear or tear and you don’t even need a belt to use this holster, it will clip right on to your pants. The Serpa is composed of kydex so you can be sure that it will last you quite some time. This type of holster is perfect for wearing around the house, hunting or even open carrying if allowed. If you’re looking for a holster that is durable, affordable, and sleek, you’d be hard pressed to find a better deal.

Choosing a holster for your 1911 doesn’t need to be complicated. The majority of handgun owners utilize more than one style of holster because different kinds are needed for different situations. An inside the waistband holster for true concealed carry suits a vast number of handgun owners while paddle holsters are great for open carry, including around your own home, and a shoulder holster can be invaluable on long drives. Figure out what your needs are and select the holsters that best suit those needs. Holsters are a very personal choice and there’s no one design that everyone’s going to like, but we’re sure you’ll be happy with one of the examples we’ve mentioned here.